Tile adhesive is a  ready-mixed mixture of  selected fine sand, and additives to improve its essential properties for laying tiles.It is a  high performance tile adhesive can be used to lay tiles on existing tiles, on cement floor, on wooden substrates (with the use of primer), or on other special substrates.

It’s very easy to use, just mix water in the ratio of 3:1,wait and allow it to flatten for 5-10 minutes and it is ready to use.

Check both surface of tile and plaster that they are free from dust and loose particles.

Comb the mixture on floor surface and apply it on tiles surface with Home Pride notch trowel for best results.

 Full contact of the adhesive on tiles’ back and substrate provides strong bonding strength and long lasting tiling work.

Tile adhesives are formulated according to specific applications such as to lay tiles, glass mosaics, large-size granite, to lay tiles on polished substrates, on dry wall system, on existing tiles without removing them, on external areas, parking areas, industrial areas, in swimming pools, and many more.

Laying tiles by using tile adhesive with notched trowel requires less amount of material. Adhesive layer is a lot thinner than the mixture of sand-cement, and this leads to lighter load to building structure.

For Interior Floor Only

Home Pride 999 Tile Adhesive

Home Pride 999 is a wonderful mixture of cement, polymer and natural mineral and other aggregate to produce adhesive when mix with water. For installation of small and medium tile on floor for interior only. It is a fantastic product in single packing with unique features and advantages. It is easy to apply and can be carried out by an ordinary labour.

Ideal for fixing ceramic tiles on floor exceed ISI type one requirement.

Designed for internal floor application.

Cement Mortar Bed , Cement Plaster, Cement Terrazzo.

Approximately 55-60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Grey & White

20 Kg and 50 Kg bags

ISI Type I Exceed ANSI 118.1

For Interior Wall & Floor

Home Pride 1001 Tile Adhesive

Home Pride 1001 polymer modified adhesive for installation of small to medium format ceramic,vitrified wall and floor tiles in interior areas for improve performance and for exterior use fortified with home pride 93 create admix.

Ideal for fixing ceramic,vitrified tile and wall tile meets ANSI 118.1 requirement.

Designed for internal floor and wall applications.

Cement Plaster, Brick Masonry, Ceramic Tiles and Stone (Mix with 93 Mortar Admixer) Concrete, Cement Mortar bed.

Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Grey & White

20 Kg

100% TDS Type-II

For Exterior Wall & Floor

Home Pride 1002 Tile Adhesive

Home Pride 1002 polymer modified adhesive for installation of small to medium format ceramic,vitrified wall and floor tiles in exterior areas for improve performance and for exterior use fortified with home pride 93 create admix.

 Ideal for fixing ceramic,vitrified tile and wall tile meets ANSI 118.1 requirement.

Designed for external floor and wall applications.

Cement Plaster, Brick Masonry, Ceramic Tiles and Stone (Mix with 93 Mortar Admixer) Concrete, Cement Mortar bed.

Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Grey & White

20 Kg

ISI Type 2 Meet ANSI 118.1

Home Pride 1011 ( Glass Mosaic Adhesive)

Home Pride polymer modified thin set adhesive for interior and exterior installation of ceramic, vitrified tiles, stone quarry, glass mosaic tiles, paver, bricks, when mixed with water it has a convenient open time and high adhesion and workability. It exceeds type 2 Indian standard, EN and ANSI Standard.

Superior bond, single component

Designed for Exterior and under water application

Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Concrete, concrete masonry, cement mortar bed, cement plaster, ceramic tiles and stones brick, masonry

Grey and White

20kg.

Meet ANSI A118.4, ISI: type 2 adhesive

For Exterior Wall & Floor

Home Pride 1021 ( Multi Purpose Adhesive)

Home Pride 1021 is premium floor and wall thin set adhesive to be mixed with water or latex for installation of medium and large format tile vitrified tiles, marble and stone on exterior floors and walls. When mixed with 93 create admix for improve performance or with home pride 3333 flexible admix for use in plywood applications.

Exceeds type 2 requirement high strength, extended open time for fixing of ceramic tile on floor and wall.

 For exterior floor and wall areas.

Approximately 55-60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Cement plaster, cement mortar bed, concrete, on ceramic tile and stone ( when mixed with home pride 93 mortar admix) brick masory, cement terrazzo.

White & Grey

20kg & 50kg Bags

For Interior & Exterior(Heavy Tile & Stone)

Home Pride 1031 ( Super Platinum Stone Adhesive)

A wonderful mixture of cement, silica and different polymers for installation of ceramic, vitrified tiles, stones, Quarry tiles, pavers and bricks on facades. It is flexible to handle structural movement and can take on extreme weather conditions. When mixed with water it has long open time with unsurpassed adhesion and workability

It can be used on various surface drive wall directly, under water application single component with ultimate bond strength. Single pack just mix with water.

Both for interior and exterior facades and under water application.

Approximately 55 -60 sq. ft. per 20 kg bag with a ¼”X ¼”(6mm X 6mm) square notch trowel for a bed of 3mm.

Concrete, cement plaster, cement tiles and stones Brick Masonry.Ceramic tile and stone.

White & Grey

20kg.

Home Pride Tile Bonder

Home Pride Tile Bonder is Single Component when mixed with Cement it gives ultimate Strength for fixing tile on wall & floor recommended for interior & exterior use

It gives cement flexibility & water curing properties

For installation of all type of tiles on floor & wall.

It can vary according to surfaces.

Can be applied on cement plaster, stones marble & chip flooring.

Grey & White

300 gm. & 1 Kg.

Home Pride Thick Bed Mortar

Home pride thick bed mortar is a special polymer base factory blend of natural mineral cement and fillers It is designed to be used with home pride latex admix 3001 or water to produce high strength thick bed adhesive upto 50 mm for installation of all type of tile and stone can be use in exterior and interior on cement plaster or on Screed for wall or floor.

Highly stronger, shock and impact resistance , can be applied from 12-15 mm in one application.

Interior and Exterior.

Concrete cement mortar bed.

Grey and White

50 kg dual pack

Home Pride AAC Block Jointing Mortar

Home Pride AAC block Jointing Adhesive is a ready to mix prepared blend of carefully raw material portland cement and graded aggregates and polymers. Designed for use with water to produce high strength mortar. Which help & in providing mechanical bond as well as excellent adhesion between the blocks.

  • Ready to use, Just add water
  • Provides Excellent Adhesion between two blocks
  • Reduces the time required for mounting the blocks
  • No curing required after blocks work is done
  • Flexible, shocks and impact resistant
  • It is recommended for fixing all type of Auto clave aerated concrete (AAC) Block
  • Concrete blocks
  • Cement mortar blocks
  • Concrete hollow blocks and bricks
  • Cellular concrete blocks
  •  Approximately 100sq. ft per 50kg bag when used at 2-3 mm bed thickness. Coverage is based on smoothness and evenness of the surface , size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 25% water added to powder.
  • ISI: Type 2 AdhesiveMeet ANSI: A118.1.

Grey

30 kg & 50 kg

Home Pride All Rounder Adhesive

It is two component when mixed together give high strength adhesive for installation of ceramic,vitrified,metal glass and agglomerates glass tiles and natural stone on any substrate.It is highly elastic,thixotropic and suitable to lay water sensitive tile & stones on highly expandable deformable, and non-absorbent substrates.

Suitable for all the substrates including metal,highly flexible & superior strength good for vertical surface.

For interior & exterior wall and floor installation of all type of tile whether ceramics,vitreous or other type of tile & metal tile and natural stone over metal substrates,concrete and dry wall boards.

15 to 17 sq.ft. per pack of 8kg with ¼”X ¼”(6mm X 6mm) square notch trowel for bed of 3mm lot of depends on variation of trowel notch size type of tile and substrates smoothness and evenness.

Cement plaster without loose particle,concrete on all type of tile and stone,wood,plywood gypsum board,cement terrazzo engineered stone & marble.Epoxy,resin and metal surface.

En 12004/ISO 13007

8 kg pail part A300 gms. part B7.7 kg

While using on backer board consult manufacturer for load bearing capacity and its uses.

VOE very low

Home Pride Polycril 1051

It is a polymer modified liquid ready-made adhesive.No need to add anything designed for installation of tiles on most dry wall boards and cement base surface free from dust and loose particle.Tiles such as Glass Mosaic Ceramic tile and natural stone can be easily fixed with Polycryl 1051.It is single component adhesive which is ready to use.

  • Ready to use/single component,high strength,save time.
  • Can be use on various dry wall board.

For commercial and residential installation of tile.Used where installation must resist shock and mild chemical for interior and exterior uses.

Approx 60 sq.ft. per 20 kg unit with ¼”X ¼”(6mm X 6mm) square notch trowel.

Cement mortar bed,plywood,gypsum wall board,calcium silicate board,concrete bison panel board,concrete surface,cement plaster,AAC block cement backer board existing ceramic tile other resilient tile and stone.

Meet ANSI A 118.4 END2TE

Off-White

5kg,10kg and 20kg.

  • All cement base surface should have been cured as per standard practice and shall be dry for tilling.
  • Consult cement backer board manufacturer for specific installation recommendation and to verify acceptability for exterior use.
  • Not for use on metal & plastic substrates.