Unsanded Grout

Home Pride Unsanded Grout

Home Pride Cementitious Grout is a polymer-modified grout that is used for filling tile joints of 1 mm to 3 mm in both interior and exterior areas. It is recommended for ceramic, vitrified, non-vitrified tiles and stones. A high-quality polymer-modified, water-resistant, cement base grout designed for grouting glazed wall tiles, porcelain tiles, mosaic, vitrified & fully vitrified tiles, and natural and engineered stones.

Suitable Substrates

Ceramic tile
Vitrified tile
Glass Mosaic Tiles
Granite
Marble
Agglomerates (Engineered Stones)
Precast Terrazzo tiles
Bricks

Features & Advantages

Using a hard rubber grout float, compact the EPOXY GROUT
Into the joints ensuring that they are completely filled.
Work in small areas and remove as much excess from the tile/stone surface as possible. Strike off excess materials diagonally to the grout lines.
Between 15 - 60 minutes after application, check for joints to be stiff.
After 12 - 24 hours, clean the tile surface with water and soap solution to remove any epoxy stains.

HOME PRIDE COVERAGE CALCULATOR

Application

Mixed grout put on grouting joints of tile and spread with a scarp, firm rubber grout flout.
Fill the grout past into the grouting joints until completely filled.
Use diagonal strokes to pack the joints.

PRECAUTION

Keep it out of reach of children.
Wear suitable protective clothing, gloves, and eyes/face protection.
After contact with skin, wash immediately with plenty of clean water.
In case of contact with eyes rinse immediately with plenty of clean water and seek medical advice.