Marble & Stone Sealer

Home Pride Marble & Stone Sealer

It is applied on Marble & Stones to close its pores to prevent any substance like Tea or coffee from penetrating the surface preventing stains. It seals all the pores of marble & stones. Immediately clean all application tools with fresh water after use. The surface to be sealed must be clean and dry. Surface temperature should be between 45 -85 F (7-30 C). Test on a small area before coating the entire surface.

Features & Advantages

  • Mild penetrating sealer that protects against stains.
  • The non-flammable solution cures an invisible.
  • Water-repellant coating.
  • Weather resistant - protects stone, brick, and tile.
  • Easy to apply – no special tools required Low VOC.

Suitable Substrates

  • Marble
  • Granite
  • Engineered Marble


  • Shake the container well for one minute before opening and using the sealer.
  • Apply the sealer with a white sponge, brush, or sprayer.
  • Allow to penetrate for 5 to 10 minutes. Wipe Off excess sealers by buffing them with a white soft cotton cloth.
  • Allow the Sealer to air cure for 72 hours. One application is sufficient for most installations.
  • In the case of highly porous substrates, a second and third application may be required.


  • Keep It out of reach of children.
  • Wear suitable protective clothing, gloves, and eye/face protection.
  • After contact with the skin, wash immediately with plenty of clean water.
  • In case of contact with eyes rinse immediately with plenty of clean water and seek medical advice.


  • One year from the date of MFG in original closed packaging.
  • Store in a cool & dry place.

Related More Products

Scroll to Top